How to Install a Ceiling Fan
While installing or replacing a ceiling fan might seem complicated, ceiling fan installation is a relatively straightforward process. With a few basic tools and materials, you can learn how to hang a ceiling fan in just a few steps. Keep in mind, this ceiling fan installation guide is a supplement to your specific ceiling fan model’s manual; use the manual that came with your ceiling fan for detailed installation instructions.
Step 1
Uninstall and remove an existing fixture
What is a ceiling fan-rated electrical box?
A ceiling fan-rated electrical box is used to house electrical wire connections and properly support heavy fixtures such as your DICI's KBS Ceiling Fan. Typically marked “Approved for Ceiling Fans” or “Rated for 70lbs”, this round or octagonal-shaped container should be mounted to a ceiling joist, woodblock, or an adjustable brace.
If you find your DICI KBS Fan ceiling bracket is too wide for your electrical box, it’s most likely not a ceiling fan-rated electrical box. We recommend you hire a certified electrician if you need one installed.
Power Off!
The power to the ceiling fan-rated electrical box must be turned off at the breaker before installing your KBS Ceiling Fan. Use a voltage meter to confirm the correct breaker was switched off and electricity is not flowing to any wires you’ll be touching.
Installing a new ceiling fan versus replacing an existing fixture requires different methods. Learn how to replace a ceiling fan with these simple steps:
01.Turn off power at the wall light switch and the circuit breaker.
02.For increased safety, place a piece of tape over the wall light switch and circuit breaker to make sure they're not accidentally switched back on while you're installing the fan.
03.Before making contact with any electrical wiring, use a circuit tester to verify the power is off.
04.Disconnect the existing fixture's wires and screws that are mounting the fan to the ceiling.
05.After uninstalling the existing fixture, verify that the electrical box is ceiling fan-rated. The ceiling fan box should be able to support 70 pounds.
Installation Video
This video will show you how to install a ceiling fan. If you still have any questions about installing ceiling fans, please contact us at: support@kbsceilingfan.com
When to Call a Professional Electrician
While the steps above are straightforward, we understand that electrical work can be intimidating for some. If you are unsure about any part of the installation process, we highly recommend contacting a licensed, professional electrician.
Do not proceed if:
- You are unfamiliar with electrical wiring or feel uncomfortable handling electrical components.
- The device does not turn on after following the steps above.
- You encounter any issues with the wiring, such as exposed wires, damaged components, or a burning smell.
A professional electrician can install your sofucor ceiling fan safely, ensuring that everything is working correctly and up to code.
Additional Tips
- Testing Your Installation: After installation, always test the device to make sure it operates properly. If you notice any malfunction, turn off the power and inspect the wiring connections again.
- Routine Maintenance: Periodically check the device for any signs of wear and tear. If anything appears damaged, turn off the power and replace any components as needed.
Warranty & Support
If you encounter any issues during installation, or if the product doesn’t seem to be functioning as expected, please refer to our Warranty Card for troubleshooting tips or contact our support team for assistance.
We are here to help ensure your installation is safe and your experience with DICI mall is a positive one!